Actualisation and news

All modified and new files are always immediately available for download in the link,
that you received by email.

5. 7. 2021

Added a short recommendation of Slicer settings on the main page.

30. 6. 2021 - T-34/85

Fixed gearbox part 24, some slicers reported an error.

22. 5. 2021 - T-34/85

Build Guide for turret with Taigen mechanics - final version.
The parts can also be used in the previous version of the turret. The filling hole must be drilled, the servo holder removed and the cannon tilt shaft replaced.

20. 5. 2021 - IS-1

Added the missing part of the wheel suspension No. 45 and a minor modification of the instructions - list of materials.

19. 5. 2021 - T-34/85

Modified turret 85 for Taigen airsoft shooting unit - beta version, without Build guide yet.
https://lubos71.rajce.idnes.cz/T-34_85/1486146418

10. 5. 2021 - T-34/85

New versions of the wheel suspension lever - parts no. 53 and 54.
The levers are reinforced and allow higher ground clearance.

29. 4. 2021 - T-34/85

Fixed part 15 Lower Hull to the correct version.

29. 4. 2021 - M4A3 Sherman

Adjusted the size of the servo holder for cannon recoil - for 30 mm and 23 mm servos
(part 198).

22. 4. 2021 - M4A3 Sherman

New turret M4A3 Sherman (76)W with Taigen firing unit is ready.
Build Guide is updated to version 2.

3. 4. 2021 - IS-1

Fixed STL gearbox parts 53 and 65.

26. 3. 2021 - KT II.

Minor updates in the Build guide - version 3.

19. 3. 2021 - M4A3 Sherman

New variant of wheels (with holes) - in folder "Optional wheels"

14. 3. 2021 - IS-1

New Build Guide and few small improvements of STL files.
There is version with new gearboxes and separated pieces of the tracks only.

If you are in process of building, you can continue with new version.
Old version of STL files and Build guides is in folder "OLD"

3. 3. 2021 - M4A3 Sherman

Added tracks holes variation to folder "Tracks". You can select best one according to your printing setup or wire diameter accuracy.

2. 3. 2021 - M4A3 Sherman

New model of  M4A3 Sherman 105 mm HOWITZER.

26. 1. 2021 - Kpfw.38(t)

Modification of suspensions - reinforcement with steel wire (page 22 of the Build guide).

9. 1. 2021 - KT II.

Modification of the rear fenders.

5. 1. 2021 - IS-1

Modification of track's parts for connection with a rod 2 mm - folder "tracks/rod version"

25. 11. 2020 - British Armored Car Mk.IV

New model of  British Armored Car Mk.IV at scale 1:10

14. 11. 2020 - T-34/85

Minor changes in Build guide - info about realistic tracks and turret + wheels 85.

10. 11. 2020 - Kpfw.38(t)

Added motor cooler guide, PDF. Files are in folder "accessories".

8. 11. 2020 - T-34/85

New road wheels according to version 85 added to folder "wheels".

5. 11. 2020 - KT2

Added a new gearbox with a slower 1:75 ratio (the original has a ratio 1:60)

Photos: https://lubos71.rajce.idnes.cz/King_Tiger_II._new_gearbox/

5. 11. 2020 - Kpfw.38(t)

Correction in Build guide on page 31.

4. 11. 2020 - German Panzer Kpfw.38(t) Ausf.G

Added new tank model German Panzer Kpfw.38(t) Ausf.G.

12. 10. 2020 - King Tiger II.

Build Guide is done, STL files of King Tiger II. are ready.

Added - How to set Airsoft mechanics Build guide.

3. 10. 2020 - T-34

Correction on page 20 of the Build guide.

1. 9. 2020 - T-34

Reinforced wheel suspension levers, modified holes in the axles.

19. 8. 2020 - T-34

Added "sound" folder with instructions for sound module with Picaxe processor.
Added "real tracks" folder with more realistic tracks design for 0.5 mm extrusion printing. Only for wire connection th. 2 mm.

18. 8. 2020 - T-34

Shortened length of tracks, a total of 6 mm. Due to the use of printed joints, they are pulled out during operation. Also added a variant of individual links for connection with brass wire th. 2 mm.

1. 7. 2020 - IS-1

New gearbox for download and instructions. Bigger, stronger, easier...