Do you have a 3D printer?
Print your RC tank.

Do you enjoy 3D printing, model making and RC models? Then you are here!
Driving a self-built tank is much more fun than it seems at first glance.
The simple design and steering principle will give you the freedom for your own ideas.
So you can make your models even better. Remote-controlled lighting,
sound effects such as gunfire and engine sounds, or smoke effects.

Please read the Terms and Conditions before purchasing the STL files
and test your printer with the STL test file here. Use 10x15x4 and 15x21x4 bearings for test.

Josif Stalin 1

Model of the Soviet heavy tank 1:10
Build plate size 25x20 cm.

Price of STL files: 20 EUR

M4A3 Sherman

Model of the American medium tank 1:10
Build plate size 20x20 cm.

Price of STL files: 21 EUR

T-34/85

Model of the Soviet medium tank 1:10
Build plate size 20x20 cm.

Price of STL files: 19 EUR


King Tiger II.

Model of the German heavy tank 1:10
Build plate size 25x20 cm.

Price of STL files: 22 EUR

German Panzer Kpfw.38(t)

Model of the German light tank 1:10
Build plate size 20x20 cm.

Price of STL files: 18 EUR

Comet I. (A34)

Model of a UK cruiser tank 1:10
Build plate size 20x20 cm.

Price of STL files: 23 EUR


Renault FT-17

Model of the French light tank 1:10

Build plate size 20x20 cm
Price: 17 EUR

British Armored Car Mk.IV

Model of the British armored car
Static model 1:10

In preparation


You can pay via PayPal or credit card.

You will receive a link to download the files by email (same as PayPal)
after payment, no later than the next day.

If you want to send the link to an email address other than your PayPal contact address,
send me a message using the form below.

If you will not receive an email with a link to the STL files, check your spam folder first.

You need to enable pop-ups in your browser to download your STL files.

High quality models directly for 3D printing


The 3D tank models are very carefully prepared for easy printing.
The STL files of the parts are oriented in the direction of printing
and most are printed without supports.

The building instructions will guide you through the assembly of the models step by step. All parts are designed for printing from PLA material. Detailed information can be found right at the beginning of each manual. Please pay special attention to it, especially to the "what you need to build" passage.


Download tank Build guides...

Before purchasing STL files, review the manual and make sure
that you have everything you need to build. Of course you can
also print it as a static model at any scale. Then glue the joints,
and replace the bearings with printed rings.


What is new?

Here you can find information on updating manuals and STL files.
All modified and new files are always immediately available for download in the link,
that you received by email.


3D Printer Setup - A Little Theory


Tank electronics wiring diagram


CNC milling machine